 
|
Florida Probe set up for EagleSoft
In the 'Lists' menu, select 'Clinical Lists'
In the 'Clinical Lists' menu select 'Application Interfaces'
In the 'Application Interface Manager' window that appears,
select 'New'
In the 'New Application Interface' window you must enter the
Florida Probe information:
Name: Florida Probe
Location: C:\Program Files\Florida Probe Coporation\FP32\FP32.exe
(This location path is the default location path for the Florida
Probe. You may type the path exactly as above or use the 'Browse'
button and navigate to the location by selecting the "C:"
drive, then the 'Program Files' folder, then the 'Florida Probe
Corporation' folder, then the 'FP32' folder, and finally selecting
the "FP32.exe" file.)
Be sure that 'File Location' is marked and not 'Registry Location'
Parameter 1: Patient ID
Parameter 2: First name
Parameter 3: Last Name
Parameter 4: (None)
Parameter 5: (None)
Add a check mark to the box next to "Add to 'Application
Interface Manager' menu'
After entering all the information, press the 'OK' button to
add the New Application interface.
Florida Probe should now appear in the 'Application Interface
Manager' window. Select 'Close'
You may now access the Florida Probe through the 'Activities'
menu by selecting 'Clinical Activities' then selecting 'Application
Interface Manager' and finally, 'Florida Probe'. Next, you will
see the Patient List appear. The Florida Probe software will be
launched upon selection of a patient.
|
|
|
